Granite cutting: tool selection
Porcelain stoneware is a material of high strength, similar in density to tile. And therefore it is used for laying on the floor and wall panels in rooms and rooms subject to various temperatures, frequent moisture ingress and mechanical influences. Considering that cutting such tiles is similar to processing a stone, then a different special cutting tool is needed.Cutting granite requires both manual and electrical appliances. Such a tile does not lend itself well to manual tile cutting. The tile cutter used for tile is suitable for porcelain stoneware of small thickness, up to 7 mm. In this case, the mechanical knife should be with a massive base without backlash. However, it is not advisable to use a tile cutter for tile, because marriage or too rough processing is not excluded, since porcelain stoneware has a high hardness (about 6 Mohs). It is difficult to cut them, and often the edges are rough, and if you try to cut them again, the tile may break off unevenly.The tile cutter, although a relatively cheap tool, is about 2.1 thousand rubles. But it does not serve for long, and it is risky to work with them. It is better to choose an angle grinder "grinder", with a circle having diamond abrasive spraying. With a small scale of cutting, for example at home, the grinder is a good fit. However, performing tile trimming work can also be rough. In addition, when working with this tool, the employee exposes himself to increased risk, which means that the "Bulgarian" must necessarily be serviceable. The builder needs to be in overalls: a special suit, glasses, and a respirator, when working with a grinder, dust is released and microparticles fly off, exposing the eyes and respiratory organs to danger.In mass construction, another more accurate device is used, a special electric tile cutter, which is a machine with a bed and a diamond circle. During the operation of the disk, water is supplied to it. The tile itself is fixed, and therefore the cut is as smooth as possible. The quality of work is high. However, the cost of such a machine is high - from 3 thousand (household appliance) to 9 thousand rubles. (professional construction installation).For curly and circular cutting, special wire cutters and a circular saw with a special nozzle resembling the one used for an electric drill are used. doradobet
Please Submit a job scope to schedule your trimarc install or delivery.
Receiving
Please notify us via fax at (770) 447 – 9368 or email at [email protected] of shipments you are scheduling for us, identifying the carrier and shipper prior to the shipment arriving at our location.
Send all LTL, truckload and UPS/Fed-Ex shipments to:
YOUR NAME – PROJECT/SIDEMARK
C/O TriMarc Installation
5952 Peachtree Industrial Blvd., Suite 2
Norcross, GA 30071
All LTL and truckload shipments must call us at (770) 447-9308, 24 hours prior to delivery.
Customer Pick-ups: Monday – Friday, 8:00AM – 3:30PM (Closed 12PM – 1:00PM).Minimum 24-hour notice for customer pick-up.
Receiving Rates:
- Inspection Fee:$10 per item
- Receiving Fee:$10 per item
- Uncrating Inspection Charge: $35
- Storage Rates:$2.00 per square ft. (first 60 days FREE), assessed on first of month
If TriMarc Installation pays COD Freight, a 15% handling fee will apply.
Customer Pickups
Customers may pick up items Monday – Friday from 8:00AM until 3:30PM
Minimum 24-hour notice for customer pick-up.
$10/piece dock charge for pick-up by another carrier or customer pick-up.
TriMarc is not responsible for damages incurred due to improper loading or type of vehicle used.
Installation
If you need specialized installation services for your project, look no further than TriMarc Installation. We have the experience to get the job done right, on time and on budget.
If purchasing through ADG Interiors, a brand of Atlanta Design Group:
- For all ADG Home orders over $5,000 receive one FREE hour of installation,
-
$15,000 receive two Free hours of installation
The following terms apply:- The one hour cannot be split up.
- Balance of invoice must be paid in full before TriMArc can schedule and install.
- If client elects to pick up their ADG Home order instead of taking advantage of the installation, the customer pick-up will be FREE. For ADG Home orders under $5,000, there is a $10.00 pick-up fee for each piece or carton.
- Free receiving will be provided:Upon receipt, we will open, inspect and blanket wrap each piece, remove cartons and await further instructions. A Receiving Report of the pieces received will be faxed or emailed to the client within eight business hours of receipt. We do this for non ADG Home items too.
Other Charges and Fees
- Minimum Hours: One hour minimum per installation project
- Fuel Charge: None
- Assembly Fees: See hourly rates above
- Trip Charge: $35 flat fee per trip within the metro Atlanta area
- Out-of-State Installations: Please call us at (770) 447-9308 for a quote
- Art Installations: When art is purchased from Patrick Allen Art, a Brand of ADG, the installation fee is reduced to $50/hour for a 1-man crew or $70/hour for a 2-man crew; otherwise, the standard hourly rates apply.
- Cancellation Fee:A $100.00 cancellation fee per scheduled hour for installations, deliveries, or on-site pickups if cancelled within 36 BUSINESS hours of scheduled appointment.
- Crating Fees: $75.00 per crate
Installation and Drive Time Rates
| Regular | Overtime (after 8 hours) | |
|---|---|---|
| One man and a truck: | $80/hour | $110/hour |
| Two men and a truck: | $120/hour | $160/hour |
| Three men and a truck: | $155/hour | $210/hour |
| Four men and a truck: | $190/hour | $255/hour |
| Four men and TWO trucks: | $220/hour | $285/hour |
| Five men and TWO trucks: | $260/hour | $335/hour |
| Six men and TWO trucks: | $295/hour | $380/hour |
| Additional men: | +$40/hour | +$50/hour |
| Additional truck: | +$30/hour | +$30/hour |
Freight Service
We have negotiated competitive freight rates with regional and national freight carriers. Take advantage of our discounts by using our freight carriers to ship. We can arrange to ship your items to and from our facility. TriMarc Installation is invoiced directly eliminating the need for CODs. Please visit our Contact Us page or call us at (770) 447 – 9308 for your next shipment.
Delivery & Pickup Rates:
- For Trips Inside of I-285:$65 for up to three items $10 for each additional items
- For Trips Outside of I-285:$95 for up to three items $10 for each additional items
Furniture Repair
It happens, and we can help!
- On-Site Repairs
- Furniture Repairs
- Structural Repair
- Finish Repairs
- Color Matching
- Scratch Repair
- Antique Restoration & Refinishing
Crypton Fabric Protection Service:
| Chairs: | $20 – $59 |
| Sofas: | $79 – $89 |
| Sectionals: | $169 – $207 |
Please call (770) 447-9308 to learn about our furniture repair service.
