Buffer capacity: what it is and why it is necessary
Today, the power efficiency parameter is key to each building. And it is possible to increase its indicators not only with the help of the insulation of the facade and the installation of modern windows, but also by optimizing the operation of the heating system. One of the ways to improve this engineering complex is the installation of a modern buffer tank. This is not just a tank for expansion, but a high-tech installation that provides long-term maintenance of air temperature in the room when the boiler is disconnected.
How it works?
The buffer container is, in fact, a huge thermos. The meaning is that the heated heat carrier accumulates in this "thermos". If the system works directly from the boiler, then its cooling begins immediately after the boiler is disabled. The system with buffer capacity will start cooling only after the entire warmed coolant will be used.
Designively such a system has several differences:
- 2 contours - 1 bind the boiler and buffer tank, 2 - buffer containers and radiators of heating.
- 2 circulation pumps - 1 operates at the outlet of the boiler, accelerating the movement of the coolant, the 2nd turns on from the thermal sensor in the room as the coolant is cooled in the radiators and the fluid from the buffer container is supplied to the heating circuit.
- multiple increase in the volume of the coolant. So, if the usual contour filled with 100 liters of liquid cools over 3 hours, then the buffer container is chosen with such a volume, while they want to increase the cooling period (+ 500 l will increase the time interval of 6 times).
So the presence of a buffer capacity gives multiple energy savings - now there is no need for the boiler to work constantly and at full power. Accordingly, less gas, firewood or coal is consumed - in this way any heating system can be improved.
Additional advantages depend on the buffer container model, but, as a rule, this is an automatic security system and the ability to connect the contour of any level of complexity, including with a floor temperature adjustment.
What to pay attention to?
The decision to install a buffer container is best taken at the design stage of not only the heating system, but also the whole building. The fact is that usually in private housekeepings under the boiler room allocate small rooms with an area of up to 4 square meters. In this case, the correct installation of the buffer container (next to the boiler) can be completely excluded, because This device even minimal volume (by 500 L) has a height of about 2 m and a width of up to 1 m (more accurate dimensions can be specified, knowing the thickness of the insulation layer).
The ideal boiler room with convenient access to equipment for its connection and preventive maintenance should be an area of at least 12 square meters. Then the volume of buffer tank will be limited only by the functional features of the heating system.
If the building is already built, then it is better to invite a specialist in place to study the possibility of placing the boiler room and suggested the optimal version of the configuration of the heating system. Best Ukrainian dating website. Find Stunnish ukrainian women on https://annadating.com for chat. Free Credits available.
Please Submit a job scope to schedule your trimarc install or delivery.
Receiving
Please notify us via fax at (770) 447 – 9368 or email at [email protected] of shipments you are scheduling for us, identifying the carrier and shipper prior to the shipment arriving at our location.
Send all LTL, truckload and UPS/Fed-Ex shipments to:
YOUR NAME – PROJECT/SIDEMARK
C/O TriMarc Installation
5952 Peachtree Industrial Blvd., Suite 2
Norcross, GA 30071
All LTL and truckload shipments must call us at (770) 447-9308, 24 hours prior to delivery.
Customer Pick-ups: Monday – Friday, 8:00AM – 3:30PM (Closed 12PM – 1:00PM).Minimum 24-hour notice for customer pick-up.
Receiving Rates:
- Inspection Fee:$10 per item
- Receiving Fee:$10 per item
- Uncrating Inspection Charge: $35
- Storage Rates:$2.00 per square ft. (first 60 days FREE), assessed on first of month
If TriMarc Installation pays COD Freight, a 15% handling fee will apply.
Customer Pickups
Customers may pick up items Monday – Friday from 8:00AM until 3:30PM
Minimum 24-hour notice for customer pick-up.
$10/piece dock charge for pick-up by another carrier or customer pick-up.
TriMarc is not responsible for damages incurred due to improper loading or type of vehicle used.
Installation
If you need specialized installation services for your project, look no further than TriMarc Installation. We have the experience to get the job done right, on time and on budget.
If purchasing through ADG Interiors, a brand of Atlanta Design Group:
- For all ADG Home orders over $5,000 receive one FREE hour of installation,
-
$15,000 receive two Free hours of installation
The following terms apply:- The one hour cannot be split up.
- Balance of invoice must be paid in full before TriMArc can schedule and install.
- If client elects to pick up their ADG Home order instead of taking advantage of the installation, the customer pick-up will be FREE. For ADG Home orders under $5,000, there is a $10.00 pick-up fee for each piece or carton.
- Free receiving will be provided:Upon receipt, we will open, inspect and blanket wrap each piece, remove cartons and await further instructions. A Receiving Report of the pieces received will be faxed or emailed to the client within eight business hours of receipt. We do this for non ADG Home items too.
Other Charges and Fees
- Minimum Hours: One hour minimum per installation project
- Fuel Charge: None
- Assembly Fees: See hourly rates above
- Trip Charge: $35 flat fee per trip within the metro Atlanta area
- Out-of-State Installations: Please call us at (770) 447-9308 for a quote
- Art Installations: When art is purchased from Patrick Allen Art, a Brand of ADG, the installation fee is reduced to $50/hour for a 1-man crew or $70/hour for a 2-man crew; otherwise, the standard hourly rates apply.
- Cancellation Fee:A $100.00 cancellation fee per scheduled hour for installations, deliveries, or on-site pickups if cancelled within 36 BUSINESS hours of scheduled appointment.
- Crating Fees: $75.00 per crate
Installation and Drive Time Rates
| Regular | Overtime (after 8 hours) | |
|---|---|---|
| One man and a truck: | $80/hour | $110/hour |
| Two men and a truck: | $120/hour | $160/hour |
| Three men and a truck: | $155/hour | $210/hour |
| Four men and a truck: | $190/hour | $255/hour |
| Four men and TWO trucks: | $220/hour | $285/hour |
| Five men and TWO trucks: | $260/hour | $335/hour |
| Six men and TWO trucks: | $295/hour | $380/hour |
| Additional men: | +$40/hour | +$50/hour |
| Additional truck: | +$30/hour | +$30/hour |
Freight Service
We have negotiated competitive freight rates with regional and national freight carriers. Take advantage of our discounts by using our freight carriers to ship. We can arrange to ship your items to and from our facility. TriMarc Installation is invoiced directly eliminating the need for CODs. Please visit our Contact Us page or call us at (770) 447 – 9308 for your next shipment.
Delivery & Pickup Rates:
- For Trips Inside of I-285:$65 for up to three items $10 for each additional items
- For Trips Outside of I-285:$95 for up to three items $10 for each additional items
Furniture Repair
It happens, and we can help!
- On-Site Repairs
- Furniture Repairs
- Structural Repair
- Finish Repairs
- Color Matching
- Scratch Repair
- Antique Restoration & Refinishing
Crypton Fabric Protection Service:
| Chairs: | $20 – $59 |
| Sofas: | $79 – $89 |
| Sectionals: | $169 – $207 |
Please call (770) 447-9308 to learn about our furniture repair service.
